Advanced Glow Effects

In this tutorial, we're going to create some really sharp-looking glow effects using a combination of layer styles, the Pen Tool and Color Blending. The end effect is quite stunning and hopefully you'll pick up some tips you didn't know before.

Step 1:

As with pretty much every tutorial I've ever written, we begin with a radial gradient. This one is pretty harsh and goes from a reddish brown color to black. Here are the exact color codes:

Foreground color - #922f00
Background color - #000000

Step 2:

In this tutorial, we actually need a pretty intense center, so what we'll do is duplicate the layer we just made and set the one above to a blending mode of Color Dodge. There are a few types of blending modes, darkening ones, lightening ones, colorizing ones and inverting ones. Color Dodge is probably the strongest of the lightening ones. As you can see in the screenshot, it produces a pretty full-on center.

Step 3:

Now in our glow effect, it helps to have a nice textured background. So we are going to create a sort of smoky haze. To do this, create a new layer, then make sure you have white, #ffffff, and black, #000000, selected as your background and foreground colors.

Then go to Filter > Render > Clouds. This will give you the same random cloud pattern as above.

Step 4:

Now set the opacity of your layer to Overlay and 30% transparency. In some instances this would be enough, but for our needs we want it even smokier looking!

So go to Filter > Sketch > Chrome and use default settings of 4 and 7 for detail and smoothness respectively. Actually you can probably mess around with those if you want, but the defaults seem to be fine.

When you're done, the result should look a lot smokier (once its overlayed at 30% transparency that is). You can see the result in the background of the next screenshot.

Step 5:

Now before we can start making glows, we need to have something to glow. Here's where we break out the pen tool. If you have used the pen tool much I suggest playing around with it a little. There are some tricky things you can do with shortcuts, but for this tutorial you don't need those.

In fact all we want to achieve are some nice curves. Fortunately this isn't too hard. I find the trick is not to use too many points. Instead rely on the Pen Tool's natural curving and drag the mouse out for each point so you get a big angle. In this S-curve shown above, I've only used three points, the starting point, the end point and one in between to give it the bend.

Step 6:

Once you have a nice curve, create a new layer. Then click on the Paintbrush Tool (B) and choose a very thin, hard brush. As you know, soft brushes are the blurry ones and hard brushes are more solid. In this case I suggest using a thickness of 3.

Note that you can have any color selected as your brush color because we'll go over it with a layer style shortly.

Step 7:

Now switch back to the Pen Tool. You must switch tools in order to do this next bit.

Then right-click and select Stroke Path. A little dialog box will appear as in the screenshot. Choose Brush and make sure there is a tick next to Simulate Pressure. This is important as it will give your curve tapered ends which will make it rock!

Next right click again and select Delete Path.

Step 8:

You should now have something like the above. Just a thin, cool swishy thing.

Step 9:

Now we add some glows. The easiest way to make our glows is to use layer styles. And the best way to tell you what layer styles to use is to tell you to download the sample Photoshop PSD from the bottom of this page and then open it up and look through them there.

In a nutshell, I've added two sets of glows. To do this I first use Outer Glow and then because I want a second glow, I change the Drop Shadow settings so that it becomes a glow (you can do this by reducing the Distance and changing the blend mode to something like Color Dodge)

Oh and also I've used a Color Overlay to make the item white so that its like the center of an intense glow.

Step 10:

So now you have the same line but with a cool glow coming off it. The beauty of using a layer style is that you can copy and paste it to other layers. To do this you just right-click the layer and select Copy Layer Style then create a new layer and right-click and choose Paste Layer Style.

Step 11:

So now repeat the same process a couple of times to make more squiggly lines.

In this instance, I made one a little thicker by changing the paint brush size before I did the Stroke Path bit of the process. I also made a third line and erased part of it and sorta made it join the other two to look like a cool triangular shape.

Step 12:

Here I've added some text in and applied the same layer style to the text layers.

It's important to pay lots of care and attention to your text. When you're first starting out, use simple fonts and play with spacing between letters, words and sizes. You can achieve a lot with just some small tricks. Here I've contrasted the three words by making Glow a lot larger and in regular casing, then made Advanced and FX much smaller, with greater space between the letters and all caps.

You can control spacing with text using the Character window. If it isn't already open go to Window > Character and it should appear. Mess about with the different settings until you learn what each controls.

Step 13:

Now we add some particles. To do this, create a new layer then select a tiny paint brush - size 3 - and just paint some dots on. It helps if they are clustered towards the center of the glow so that it looks like they are emanating from there.

You can make some of the central ones larger by doubling over on them with a second paint brush dab.

Then paste our Glow layer style on to that layer too!

Step 14:

Now that's looking pretty cool, but it will look even cooler if we give it some subtle coloring instead of this super gaudy red.

So create a new layer, and using a radial gradient, draw a blue to white gradient as shown.

Step 15:

Then set that layer to a blending mode of Color and change the opacity to 50%.

You'll see that it turns the image kind of bluish. I think that's looking much cooler already, but just to go that extra step I also created a couple of extra layers, one with some faint yellow and one with faint purple. You can see them in the screenshot above.

I set each layer to blending mode of Color and thin opacities so that they all fade together.

Step 16:

And there you have it: advanced glow effects with a cool color blend and subtle smoky background combined make for a pretty great effect.

Just remember to experiment with settings and try applying the glow to different things to see how it turns out. And try different color combinations, some surprising combinations turn out really beautiful. Good luck!

Ever wanted to make text out of grass? Well with Photoshop you can. In this tutorial we'll create a rather cool-looking grass-text effect using a photo of grass, the Pen Tool and a bit of patience.

This is the first of a five-part set of tutorials where we'll use Photoshop to make text out of all sorts of things. So let's get ready to Photoshop!

The End Effect

I like to begin tutorials by showing where we're going. So without further ado, here is the final grass-text image.

Part 1—The Background

This tutorial is made up of three parts—the background, the text itself, and some final extra effects. So first of all we're going to make a background. To do this we create a new document in Photoshop. I made mine 1920 x 1200 because I want this image to sit on my laptop background.

We start by drawing a Radial Gradient with the Gradient Tool (G) going from a light yellow-green (#adbf41) to a mid-range green (#328a26). I wonder if I've ever written a tutorial that doesn't start with a radial gradient. :-)

Step 2

Now for this image we want to create a really textured background, faintly resembling paper. So the first thing we need is ... a paper texture!

Happily you can grab some really awesome grungy paper textures from Bittbox and they are nice and large too, which is good because this is a huge canvas.

So I can't remember which texture I used first, but grab one, desaturate it (Ctrl+Shift+U) and stretch it over the top to fit the canvas.

Step 3

Now we set the layer to Overlay and 70% Opacity to blend the texture with our nice green background.

Step 4

Now to get a really distressed look, I then copied this layer, spun it around 180' and set it to 20%. Then I brought in a few more layers of paper texture (using different textures, mostly from Bittbox) and set them all to faint overlays, one on top of the other.

This was partly for the extra distress, but also because I realised that the textures looked a bit grainy and not small and sharp. So by combining extra textures and then fading it all back, I can get a nicer, sharper overall look.

Anyhow as you can see in the screenshot there are six layers here. Don't forget if you are a Plus member you can download the PSD file for this tutorial and take a look in there yourself!

Step 5

Now I duplicated the original background gradient, placed the duplicate layer above all the textures and set it to 40% Opacity—this tones back the texture so it's not quite so grungy!

Step 6

Now we create a new layer over the top and using a large, soft, black brush, add some black to the edges. It's worth toning back the opacity to about 30% and Overlay. You can then duplicate the layer and run a heavy Gaussian Blur over it (set to about 32px). That way the edges really soften out.

Step 7

OK, we now have a nice background!

Part 2—Grass Text!

OK, we are now ready to make some grass text. To do that, we're going to need some nice pretty grass to cut. After a lot of searching, I finally found this lovely photo on Flickr of grass.

So download the image at full-size and copy it on to your canvas.

Step 9

Next we need some type. So select a font you want to cut out with. I chose Swiss 924BT, which is fat and condensed type. I thought it looked nice and grand. And I've written the text "EARTH". That's because I'm making five of these wallpapers—earth, water, fire, air, spirit ... it's like that cartoon I used to watch as a kid, Captain Planet!

Anyways, so just set your text out in white and set it to Overlay and like 50% Opacity. This layer won't actually show in the end, it's just a guide layer.

Step 10

OK, so here's the text on top of the grass we got earlier.

Now a bit of planning! To make text out of grass, it's not going to be enough just to stencil out the grass. Rather we need it to look all rough, with bits of grass sticking out the edges. To do that, we're going to use the letter shapes as a rough guide and then trace roughly around them and periodically jut out to trace around blades of grass.

I'll warn you now, it's very tiresome!

Step 11

OK, so here we are tracing. You should use the Pen Tool (P) and frankly, if you're not handy with it before you start, you will be by the end!

Notice how in the parts where my path juts out, it sort of follows individual blades of grass. That way when you have the final cut-out they will look like pieces of grass sticking out.

Step 12

When you've finished your path, it's best to save it in the Paths Palette. You can do this by switching to that palette and then clicking the little down arrow and choosing Save Path. That way if you need the path again later, you can grab it.

Anyhow, double-click the path to get the selection and go back to your grass layer. Duplicate the grass layer so you still have more grass for the other letters, then invert your selection (Ctrl+Shift+I) and cut away the excess grass. In the screenshot I've faded back the duplicate grass layer so you can see the cut out "E" part.

Step 13

OK, so here we have our "E" on the final bakcground. As you can see, it looks only slightly better than if we'd just used the letter to stencil out the grass without bothering to trace. But that's OK, what it needs is a bit more depth. After all, if that letter was really sitting there, we should see some shadow and sides to it.

Step 14

First of all though, we'll add some layer styling to give it a bit more of a three dimensional look. The styles are shown below.

Layer Style

Here's the first set of layer styles...

Step 15

Now duplicate that layer, then clear the layer style off the duplicate, so we can add some more styles. This time add the styles shown below...

Layer Style

Here's the second set of layer styles... (Note that it's 51% Opacity so it'll blend in with the previous layer)

Step 16

So this was all just experimental, and it kinda looks OK, but obviously has a long way to go. Now we'll add some shadow. For that we'll use a technique that I demonstrated in a previous tutorial, Using Light and Shade to Bring Text to Life

The idea is to make a three dimensional look. So Ctrl-click the grass layer and then in a new layer below, fill it with black. Then press the down arrow once and the right arrow once and fill it again, then repeat over and over until you get an effect like that shown. I think that was about 15 steps of filling.

Step 17

Now we run a Filter > Blur > Motion Blur on our shadow with a 45' angle and a distance of about 30. Then set the text to a low opacity of about 50%. You should have something that looks like the screenshot below.

Step 18

Now move the shadow layer down and to the right and magic happens! All of a sudden it looks like the letter is casting a shadow. Pretty neat!

Step 19

Now I duplicated this layer three times. Each time I erased a bit of it away so that as the shadow is closer to the text it gets darker. I set these layers to Multiply.

Step 20

So this text is looking pretty cool, but for that extra bit of depth we should add some bits of grass in the background/shadow area. Rather than cutting out more grass, we can just use this current letter transformed about so that it's not obvious that we're hacking it together.

So as you can see below I created a few pieces of grass. They are just cut up bits of our main letter.

Step 21

Now by moving those pieces into the shadow areas, we can make it look like there is grass sticking out and it's a real 3D object made from grass!

Because these new grass bits are in shadow, you might want to use the Burn Tool (O) to darken them appropriately.

Step 22

So yay, one letter down ... four to go! Good thing we didn't choose a long word like erm I don't know ... laborious!

Step 23

Using the exact same technique ... here is the A;

Step 24

and the R and T ... you get the picture.

Step 25

And finally, the whole word! The only extra thing I did here was to move the letters apart a little. Each letter is in its own Layer Group which makes moving it around much easier.

Part 3—The Finish!

Now nice as it's looking, our text is a little lonely and monotonous. So in this last section we'll add a few more elements to the design. Note we don't want to overdo it, though, because I want this to be a desktop background, so space it is important (for all my icons!).

So first up, let's add some extra text. Here I've placed a nice quote about the earth and unity taken from the Baha'i faith (that's my religion!). I love quotes, because it means we get three parts to decorate—the quote, the quotation marks and the source.

The text is in a variation of Swiss which is thinner, but still condensed. Using multiple fonts from the same family (heavy, light, etc) is a good, safe bet for keeping your type looking coherent.

So here I've set the quote to Overlay and 50%, then duplicated the text and set it to Screen and 50%. Then I've added quotation marks in the same Swiss font, but made them extra large and a bright shade of green. Finally, the source of the quote is in teeny letters and centered vertically. And, of course, the whole quote has been measured out so it's exactly the length of the main "EARTH" text.

Step 27

Next we'll add a bit of a highlight to the scene. To do this, create a new layer above all the rest, and using the Gradient Tool (G), draw a gradient of white -> transparent towards the top left. Then set this layer to Soft Light and 50%. This will turn it into a nice subtle bit of lighting.

Step 28

Now we'll add two eye-catching elements to offset all the green. These will be a brilliant blue butterfly and a little red ladybug. I used the excellent everystockphoto Web site that searches a ton of free stock Web sites for you to find two awesome images to use: Ladybug | Butterfly

Step 29

Placing the images is pretty easy. First the butterfly. We just open up the image in Photoshop, use the Magic Wand Tool (W) to select all the white area, then go to Select > Modify > Expand and expand the selection by 1px to make sure we've got it all. Then press Ctrl+Shift+I to invert the selection and copy the butterfly over to our main canvas.

The ladybug I selected needs to be cut out of it's image. To do that I used the Pen Tool (P) and traced around the little guy and then just cut him out that way.

Step 30

So here are our two extras. As you can see, the lady bug looks a bit weird actually because I did a quick'n'dirty job of cutting him out. But that's OK because he's going to be tiny so you won't be able to see the details anyway.

So paste them in and then shrink them down and place them appropriately. It's best if they aren't close together, because that way they'll balance each other.

I added a drop shadow to each. With the ladybug it's a very close shadow because he's small and walking on the grass. With the butterfly, I set the distance to about 10px because he's hovering in the air and therefore the shadow lands a little ways away.

Finished!

And there we have it, one neat little composition featuring text made out of grass! (Click for the full-size version)

More Photoshop Type Coming Next Week!